• Our booking engine at tickets.railforums.co.uk (powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

BVE4 MTU HST Not working :(

Status
Not open for further replies.
S

SuperVoyager

Member
Joined
8 Mar 2008
Messages
185
Location
Fife
Hi,

Got the mtu for bve, all installed. open it up in bve but there is nothing there, it just white. all other trains work fine, anything i should be doing? Thanks
 
Last edited by a moderator:
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

D

devon_metro

Established Member
Joined
11 Oct 2005
Messages
7,715
Location
London
There isn't officially a BVE4 MTU, its designed for openBVE. Hence might cause you grief.
 
Wim G.P.R

Wim G.P.R

Member
Joined
7 Aug 2006
Messages
65
Location
CARDIFF
The MTU is a Open bve only train the config does not work in reverse, ie Open to bve4.

Where as bve4 and 2 trains will run in Open but there may be problems as the config needs changing to work in open properly.

Also not all Open trains work in bve4.

Only Open trains that have a bve4 type of config, infact most UK trains are bve4 altered for Open!

Steve T.
 
Last edited:
1

156499

Member
Joined
2 Dec 2007
Messages
185
Location
Glasgow
Just take the sounds and shift out the old ones, thats what I did when using BVE4, openbve is far better in terms of graphics
 
MCR247

MCR247

Established Member
Joined
7 Nov 2008
Messages
9,594
gchst said:
try it on open bve.
Click to expand...

picard_facepalm.jpg
 
P

Pumbaa

Established Member
Joined
19 Feb 2008
Messages
4,982
V-Complex said:
Must be my graphics card then cos it all opens up but is just frozen<(
Click to expand...

Might have been your installation ;) do it again, follow the instructions to the letter and ask if you don't have a scoobies.
 
Status
Not open for further replies.

Top