No. The trains are running at 3-minute intervals, with a couple per hour left spare for contingencies. The slot it has vacated is proceeding south at 300+ kph. By the time you come to a stop, the following slot is right behind you, or already overtaken you. While you stop for a couple of minutes, a third slot is fast approaching. Once you accelerate, you might just about make it into the fourth slot, but no guarantees.
Surely depends on the length of the acceleration and deceleration lanes and dwell times.
Assume 20tph every 3 minutes, 6km/minute, Verney is at 90km, deceleration lane starts at 66km, acceleration lane ends at 126km, points can run at line speed, dwell time of 12 minutes and stop 4 trains per hour.
Of course that's a hell of a lot of land and complicated switching mechanisms, but if you say stop every 3rd train, with a dwell of 6 minutes you can fit them in without losing paths. The train that stops (the 10:00 departure) is overtaken by the 10:03 and 10:06 fasts, then the 10:09 stops and the 10:00 takes its path
Heading north, before Verney you'd have departures at 1000, 1003, 1006 etc.
After Verney the order would be
1003 Manchester
1006
1000 (taking the 1009 slot)
1012
1015
1009 (taking the 1018 slot)
1021
1024
1018 (taking the 1027 slot)
1030
1033
1027 (taking the 1036 slot)
1039
1042
1036 (taking the 1045 slot)
1048
1051
1045 (taking the 1054 slot)
1057
1100
1054 (taking the 1103 slot)
Repeating every 3 hours.
It might work if there was a good reason to stop at Verney on occasion (say a large London+Birmingham replacement airport which could justify 6tph from north and south at the cost of slowing and the added maintenance and land take)
Still confused why this conversation is happening in "HS2 Construction" and not speculative ideas though.