• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Alstom and Hitachi now announced as winners of HS2 rolling stock supplier contract

Status
Not open for further replies.

LOL The Irony

On Moderation
Joined
29 Jul 2017
Messages
5,335
Location
Chinatown, New York
The Times are reporting Alstom and hitachi are going to be announced as the winners of the HS2 contract.
The government and HS2 are on the verge of announcing that a £2.8 billion contract for the most prestigious train manufacturing project in the history of Britain’s railways is to be awarded to Derby’s historic Litchurch Lane works and Hitachi’s much newer factory at Newton Aycliffe in Co Durham.

The long-awaited contract to produce at least 54 trains that can run at 225mph, are up to 400 metres long and able to carry more than 1,000 people, is to be awarded to a joint venture between Alstom of France and Hitachi of Japan.
Unfortunate really. Poor decision if it is to be the case.
 
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

sonic2009

Established Member
Joined
19 Jan 2010
Messages
4,997
Location
Crewe
The Times are reporting Alstom and hitachi are going to be announced as the winners of the HS2 contract.

Unfortunate really. Poor decision if it is to be the case.
Poor decision why?

Personally I prefer that the order book for Litchurch lane is filled again.
 

Grumbler

Member
Joined
27 Mar 2015
Messages
508
Thank goodness for the reduced journey times, if the seats are going to be as uncomfortable as those on the GWR trains.
 

Bletchleyite

Veteran Member
Joined
20 Oct 2014
Messages
105,094
Location
"Marston Vale mafia"
Thank goodness for the reduced journey times, if the seats are going to be as uncomfortable as those on the GWR trains.

If you read the spec, unless they get to deviate from it it looks like the units will be very comfortable. Things like seat quality, very generous spacing and window alignment in Standard are all specified.
 

DanNCL

Established Member
Joined
17 Jul 2017
Messages
5,066
Location
County Durham
Does this award mean that the legal action brought against HS2 Ltd by Siemens has been resolved? Or could there still be a load more drama over this contract?

The timing of this announcement along with last night’s move to plan B, can’t tell the government don’t want our attention on last years Downing Street parties... :lol:
 

43096

On Moderation
Joined
23 Nov 2015
Messages
16,920
Poor decision why?

Personally I prefer that the order book for Litchurch lane is filled again.
The combination of Derby (serial late deliverers and software issues a speciality) and Hitachi (where do you start?) is just asking for trouble. If you want Lit Lane’s order book full it should be because they offer the best product, not tub-thumping nationalistic rhetoric.

To borrow the phrase used in the past about IBM, “Nobody ever gets fired for buying from Siemens.”
 

09ndodge

Member
Joined
12 Mar 2016
Messages
11
Does this award mean that the legal action brought against HS2 Ltd by Siemens has been resolved? Or could there still be a load more drama over this contract?

The timing of this announcement along with last night’s move to plan B, can’t tell the government don’t want our attention on last years Downing Street parties... :lol:
It may not be fully resolved but the court would have given permission for the contract to be awarded.
 

fgwrich

Established Member
Joined
15 Apr 2009
Messages
9,882
Location
Hampshire
The combination of Derby (serial late deliverers and software issues a speciality) and Hitachi (where do you start?) is just asking for trouble. If you want Lit Lane’s order book full it should be because they offer the best product, not tub-thumping nationalistic rhetoric.

To borrow the phrase used in the past about IBM, “Nobody ever gets fired for buying from Siemens.”
Exactly so. Whilst the 380s had a more troublesome introduction than most other Siemens fleets, how often have we since heard of issues with their stock?

It seems the DfT, who claim they are keen not to repeat the mistakes of the past, are keen to repeat the mistakes of the past. Like most in this area, I think we’ve given up waiting for the 701s to arrive. The prospect of a joint Hitachi / Alstom nee Derby product doe not fill me with confidence.
 

Mikey C

Established Member
Joined
11 Feb 2013
Messages
7,609
I'm sure as a sop to Siemens, the government (once the silly games with Sadiq Khan have finished) will give TfL the finances to order more Tube trains
 

stuu

Established Member
Joined
2 Sep 2011
Messages
3,515
To borrow the phrase used in the past about IBM, “Nobody ever gets fired for buying from Siemens.”
No manufacturer has a perfect record. Siemens were responsible for the design of the ICE 1 train which failed catastrophically at Eschede, something of a blemish
 

Bletchleyite

Veteran Member
Joined
20 Oct 2014
Messages
105,094
Location
"Marston Vale mafia"
No manufacturer has a perfect record. Siemens were responsible for the design of the ICE 1 train which failed catastrophically at Eschede, something of a blemish

Interestingly the composite (rubber-damped) wheel design, not totally dissimilar in concept to a dual mass flywheel in a car (which also have a reputation for failure), was considered for the APT but rejected. "Two Miles a Minute" by OS Nock refers. So it could as easily have been BR if they had proceeded. Having to convert them to solid wheels is why the ICE1's ride is a bit harsh, if I recall.
 

DanNCL

Established Member
Joined
17 Jul 2017
Messages
5,066
Location
County Durham
Reported elsewhere that the bodyshells are planned to be made using the new welding facilities at Newton Aycliffe, and final fit out and testing to be done at Litchurch Lane. Bogies also to be supplied by Alstom, but not from Litchurch Lane.

How this’ll work in reality with Alstom selling their share of the Zefiro family to Hitachi is unclear.
 

Nym

Established Member
Joined
2 Mar 2007
Messages
9,490
Location
Somewhere, not in London
So how many HGV movements between Newton Aycliffe and Derby to satisfy the political need to keep both plants busy, when both plants are equally capable of both interior fitout and structural welding?

Not to mention that I doubt there will be a gauge cleared rail route from HS2 to Litchurch Lane so it will mean yet more HGV moves to get them onto the HS2 network. But that's fine, because the government isn't trying to reduce HGV traffic at all. Honest.

Unless of course they're all classic compatible, then you just need a 60 year old diesel loco to haul them from Litchurch Lane to Birmingham, via whatever insane location the link into the classic network will be.
 

43096

On Moderation
Joined
23 Nov 2015
Messages
16,920
No manufacturer has a perfect record. Siemens were responsible for the design of the ICE 1 train which failed catastrophically at Eschede, something of a blemish
Siemens provided electrical equipment for them: they weren’t a vehicle builder until they bought Duewag and Krause-Maffei. Further, hadn’t DB changed the wheelset design (which was what failed) to a different design to what they were built with?

Bit of a cheap shot by you to bring an accident into it and blame it on Siemens, which is factually inaccurate.
 

DanNCL

Established Member
Joined
17 Jul 2017
Messages
5,066
Location
County Durham
Not to mention that I doubt there will be a gauge cleared rail route from HS2 to Litchurch Lane so it will mean yet more HGV moves to get them onto the HS2 network. But that's fine, because the government isn't trying to reduce HGV traffic at all. Honest.

Unless of course they're all classic compatible, then you just need a 60 year old diesel loco to haul them from Litchurch Lane to Birmingham, via whatever insane location the link into the classic network will be.
They're all to be classic compatible and there'll be a HS2 connection at Washwood Heath so direct access off the Derby - Birmingham route, not far to have to drag them by rail to HS2 at all.

I agree about how ridiculous it is that these'll all be moved by road between Newton Aycliffe and Derby, although it's not as bad as the IEP contract where they were all moved by sea from Japan to Newton Aycliffe!
 

LNW-GW Joint

Veteran Member
Joined
22 Feb 2011
Messages
21,125
Location
Mold, Clwyd
Hitachi/Alstom Press Release here (with photo projections) :
Press | Hitachi Rail
The UK’s two leading train manufacturers will deliver Europe’s fastest operational train, capable of operating at maximum speeds of 225mph (360 km/h), significantly reducing journey times for passengers. The fleet will be 100% electric, and be one of the world’s most energy efficient very high speed trains due to the lower train mass per passenger, aerodynamic design, regenerative power and latest energy efficient traction technology.

In a major boost to grow and rebalance the economy, the HAH-S joint venture will manufacture the 54 trains at newly enhanced facilities in County Durham, Derby and Crewe. The award to the British-based firms will protect and create thousands of green jobs and add £157 million GVA to the UK economy for every year of the train building phase.

It's a surprise that Crewe is also involved in the manufacturing work.

Once in Alstom’s factory in Derby, the largest in the UK with 2,000 staff, the trains will be fitted with all remaining components including interiors, electrics, and bogies. The bogies will be made by Alstom at their Crewe facility, first time in 17 years that these high value items have been manufactured in the UK, as part of a new investment by the firm. The welding facility in the North East and bogie production in Crewe represent important upskilling and lasting legacies for the UK.
Crewe will also be the heavy maintenance centre for the fleet.

There's no hint of the design origin of the train beyond being "predominantly UK designed", but one might suppose the bodyshells and electrics will come from Hitachi, and the rest from Alstom.
No mention of "V300 Zefiro" anywhere.
 
Last edited:

stratford

Member
Joined
20 Aug 2017
Messages
14
Missing the most important thing in this discussion. What seats will they use...
 

Bletchleyite

Veteran Member
Joined
20 Oct 2014
Messages
105,094
Location
"Marston Vale mafia"
There's no hint of the design origin of the train beyond being "predominantly UK designed", but one might suppose the bodyshells and electrics will come from Hitachi, and the rest from Alstom.
No mention of "V300 Zefiro" anywhere.

So are we effectively talking about an 8-car 80x with the bodyshells shortened to 25m (to give exactly 200m for an 8 car train), something the platform already supports, a pointier nose and a faster top speed? I figure we could well be, assuming the 80x bodyshell (cracks aside) is considered strong enough for the higher speed or can easily be reinforced.
 

XAM2175

Established Member
Joined
8 Jun 2016
Messages
3,468
Location
Glasgow
Having to convert them to solid wheels is why the ICE1's ride is a bit harsh, if I recall.
Further, hadn’t DB changed the wheelset design (which was what failed) to a different design to what they were built with?
Yes, they had originally been built with solid 'Monobloc' wheels but these were changed to the two-piece design because of complaints of rough riding. All were changed back to single-piece wheels in the immediate aftermath of the disaster.

Bit of a cheap shot by you to bring an accident into it and blame it on Siemens, which is factually inaccurate.
Indeed.
 
Status
Not open for further replies.

Top