• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Colas Class 43s

Status
Not open for further replies.

ExRes

Established Member
Joined
16 Dec 2012
Messages
6,859
Location
Back in Sussex
I don't think that this has been put on another existing thread, apologies if it has. WNXX (subscription section) report today that 43050 & 43060 have been transferred from SBXL (Porterbrook Stored Locomotives) to Colas COTS pool along with the 67s and 37s used on test trains
 
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

Townsend Hook

Member
Joined
3 Aug 2011
Messages
932
Location
GB
They’re on a short term lease to explore the possibility of 43s displacing 37s (and potentially 67s) from the PLPR infrastructure monitoring trains.
 

GRALISTAIR

Established Member
Joined
11 Apr 2012
Messages
9,451
Location
Dalton GA USA & Preston Lancs
They’re on a short term lease to explore the possibility of 43s displacing 37s (and potentially 67s) from the PLPR infrastructure monitoring trains.
So are you saying similar to the Yellow Train that is already in existence? Perhaps even specializing in embankment/Cuttings/drainage etc in view of the Stonehaven incident?
 

DB

Guest
Joined
18 Nov 2009
Messages
5,036
So are you saying similar to the Yellow Train that is already in existence? Perhaps even specializing in embankment/Cuttings/drainage etc in view of the Stonehaven incident?

Sort of. That one uses mk3s. The other sets are mk2s, but they have their own gensets, so the power cars would just be haulage. Only change needed would be through wiring, assuming they wanted both power cars providing traction.
 

Townsend Hook

Member
Joined
3 Aug 2011
Messages
932
Location
GB
So are you saying similar to the Yellow Train that is already in existence? Perhaps even specializing in embankment/Cuttings/drainage etc in view of the Stonehaven incident?

The PLPR trains already exist, and have done for some years, they carry out the same track recording functions as the New Measurement Train (albeit with slightly different equipment), with Mk2 vehicles at obviously a lower speed.

== Doublepost prevention - post automatically merged: ==

Only change needed would be through wiring, assuming they wanted both power cars providing traction.

Through-wiring the PLPR sets is the plan, or so the Colas infrastructure monitoring drivers tell me.
 

DB

Guest
Joined
18 Nov 2009
Messages
5,036
Slightly OT, but have HSTs ever been used to haul anything other than Mk3s?

HST trailers are the only ordinary passenger stock which uses direct 3-phase supply*, so the power cars can't supply to anything which uses standard ETS.

The prototype HST had a Mk1 kitchen car in it initially (although at that point the set was using standard ETS). As 43096 notes, the first incarnation of the NMT had a couple of Mk2s, but all the NR sets (including the NMT) have onboard generators so don't need an ETS supply - and actually, I believe the generator does supply 3-phase - the sets have all been rewired for it.

*The Royal Scotsman set seems to use 3-phase, supplied from an onboard generator. The Royal Train appears to be dual wired, for standard ETS from the loco or 3-phase from the onboard generator.
 

43096

On Moderation
Joined
23 Nov 2015
Messages
16,904
HST trailers are the only ordinary passenger stock which uses direct 3-phase supply*, so the power cars can't supply to anything which uses standard ETS.

The prototype HST had a Mk1 kitchen car in it initially (although at that point the set was using standard ETS). As 43096 notes, the first incarnation of the NMT had a couple of Mk2s, but all the NR sets (including the NMT) have onboard generators so don't need an ETS supply - and actually, I believe the generator does supply 3-phase - the sets have all been rewired for it.

*The Royal Scotsman set seems to use 3-phase, supplied from an onboard generator. The Royal Train appears to be dual wired, for standard ETS from the loco or 3-phase from the onboard generator.
And of course power cars have hauled various barrier vehicles around of Mark 1 and 2 types. 41001 hauled Mark 2s at various times, and also shunted some freight wagons around Leicester depot at one point.
 

rebmcr

Established Member
Joined
15 Nov 2011
Messages
3,935
Location
St Neots
Slightly OT, but have HSTs ever been used to haul anything other than Mk3s?

Mk4s when the 225s were being introduced. Originally they were just being used as surrogate DVTs but it was found that the engines idling all day was bad for them.
 

43096

On Moderation
Joined
23 Nov 2015
Messages
16,904
Mk4s when the 225s were being introduced. Originally they were just being used as surrogate DVTs but it was found that the engines idling all day was bad for them.
It was the other way round: a Class 91 replacing one power car on an HST set.

They were used for some high speed testing of Mark 4s as part of their acceptance programme, though.
 
Last edited:

61653 HTAFC

Veteran Member
Joined
18 Dec 2012
Messages
18,629
Location
Yorkshire
Mk4s when the 225s were being introduced. Originally they were just being used as surrogate DVTs but it was found that the engines idling all day was bad for them.
Thought they only worked with HST trailers, not with Mk4s. 43s wouldn't be able to provide ETS to a Mk4 set.
 

Richard Scott

Established Member
Associate Staff
International Transport
Railtours & Preservation
Joined
13 Dec 2018
Messages
4,139
Slightly OT, but have HSTs ever been used to haul anything other than Mk3s?
They have been placed back to back and used to rescue occasional failure. Typically think it was the Paddington Penzance sleepers so all mark 3 stock but of normal loco hauled variety.
 

NormyFGW

Member
Joined
26 Apr 2014
Messages
8
Location
BRISTOL
Slightly OT, but have HSTs ever been used to haul anything other than Mk3s? Having worked a full HST set from Paddington to Hereford around 19 years ago, the set was due to run ECS back to SPM Depot via Bristol Temple Meads. This was a nightly diagram at the time, but on this particular night, our set developed a fault that meant it could not be driven from the leading power car, and we only made it as far as Abergavenny. We changed ends, and set about returning to Bristol via Hereford, Worcester and Cheltenham, only to be stopped at Hereford and informed that due to signalling issues, the route via Worcester was closed. We then had over a 2 hour wait at Hereford waiting for 2 HST power cars coupled back to back, to travel up from SPM Depot to us, couple up, and drag the entire convoy back to SPM. It's a shame that this happened in the early hours of the morning, as it would no doubt have been a photographers delight to see a pair of power cars (43185/151) back to back with a full 2+8 set in tow, hurtliing down the bank and around Maindee curve on its way back to Bristol.
 

Philip Phlopp

Established Member
Joined
31 May 2015
Messages
3,003
The Brecknell Willis and RTC chaps used a couple of HST power cars do to the aerodynamic testing on the BR/BW High Speed pantograph, the old Prometheus lab car (an ex Mk.1 coach, subsequently given a pair of BT10 bogies) was the jam in the power car sandwich.

Photo at http://www.traintesting.com/lab 6.htm
 

BRX

Established Member
Joined
20 Oct 2008
Messages
4,096
Have Colas had the HST powercars out yet?

Is their plan to retire the 37s altogether fairly soon?
 

matt

Forum Staff
Staff Member
Global Moderator
Joined
30 Jun 2005
Messages
8,221
Location
Rugby

Mollman

Established Member
Joined
21 Sep 2016
Messages
1,506

jopsuk

Veteran Member
Joined
13 May 2008
Messages
12,773
I know they've given them new logos, but I wonder if they'll do a full repaint, and if so will they vary it from the standard (on their other locos) where the orange end is always to the right?
 

Wyrleybart

Established Member
Joined
29 Mar 2020
Messages
2,017
Location
South Staffordshire
I know they've given them new logos, but I wonder if they'll do a full repaint, and if so will they vary it from the standard (on their other locos) where the orange end is always to the right?
Or they could just paint them yellow to match the stock they intend to work with.
 

Townsend Hook

Member
Joined
3 Aug 2011
Messages
932
Location
GB
Or they could just paint them yellow to match the stock they intend to work with.

Unlikely. The three yellow powercars which operate the New Measurement Train are leased directly to Network Rail, Colas are simply contracted to operate them, which is why they carry Network Rail Livery. 43050 and 060 are leased to Colas and, if they stay long term, will almost certainly receive Colas house colours, as with the 37s and 67s used with the infrastructure monitoring fleet.
 

DB

Guest
Joined
18 Nov 2009
Messages
5,036
Unlikely. The three yellow powercars which operate the New Measurement Train are leased directly to Network Rail, Colas are simply contracted to operate them, which is why they carry Network Rail Livery. 43050 and 060 are leased to Colas and, if they stay long term, will almost certainly receive Colas house colours, as with the 37s and 67s used with the infrastructure monitoring fleet.

If that happens, I wonder whether they will buy them outright? So far as I understand it that's their usual policy (the two 67s were bought off DB).
 

Townsend Hook

Member
Joined
3 Aug 2011
Messages
932
Location
GB
Status
Not open for further replies.

Top