Mgameing123
Member
Hi guys, I just realised that since HS2 is going to be built using European loading gauge, doesn’t that mean we could run double decker trains on HS2?
Double decker stock doesn’t necessarily preclude level boarding.Yes we could, but there would be no value in a marginal increase in route capacity which would prevent level boarding and requir modification to all station platforms along the line
Average passenger journey times would also increase by a small amount.
The IEP also has TERRIBLE seats that are crammed together meanwhile the Swiss might be focusing more on comfort so that can explain quite a bit.Alstom have done great things with their Double Deck TGVs but do bear in mind that even 'Continental' loading gauge has limitations: yes, you can comfortably stand up on both decks but they are still somewhat cramped and the toilets particularly so. The incremental seat numbers do come up at a cost.
The various Swiss double deck trains are probably the most comfortable to travel in and have wide doors and reasonably good level boarding. Their seat capacity is only marginally higher than those of an IEP in practice (although the door/saloon entry widths into the C800s are very constrained and lead to slower boarding than SBB manage).
Obviously, where HS2 trains run 'off-route', eg. to anywhere in the NW and Scotland Double Decks are non-runners.
If the Continental loading gauge was about 25cm larger in both width and height that would have been brilliant (see eg Finland!)
They have terrible seats but they are absolutely not crammed together, they have more legroom in airline seats than anything else I'm aware of (GWR ones anyway, never been on any of the other variants)The IEP also has TERRIBLE seats that are crammed together meanwhile the Swiss might be focusing more on comfort so that can explain quite a bit.
AIUI the HS2 platforms will not be UIC gauge compliant in either height or distance from the rail to provide level boarding with UK gauge ("classic-compatible") trains. So double-deckers would still face a lower deck width restriction.Hi guys, I just realised that since HS2 is going to be built using European loading gauge, doesn’t that mean we could run double decker trains on HS2?
I would hope they have had the sense to design them so they can be easily adjusted later, with gap fillers fitted to platforms for classic compatible stockAIUI the HS2 platforms will not be UIC gauge compliant in either height or distance from the rail to provide level boarding with UK gauge ("classic-compatible") trains. So double-deckers would still face a lower deck width restriction.
Given the likelihood of captive HS2 stock ever running now, I don't think it'd make too much difference.I would hope they have had the sense to design them so they can be easily adjusted later, with gap fillers fitted to platforms for classic compatible stock
The IEP also has TERRIBLE seats that are crammed together meanwhile the Swiss might be focusing more on comfort so that can explain quite a bit.
Isn't this a problem that has already been solved, for the Class3 373 with their folding steps?AIUI the HS2 platforms will not be UIC gauge compliant in either height or distance from the rail to provide level boarding with UK gauge ("classic-compatible") trains. So double-deckers would still face a lower deck width restriction.